Mirror Reference

Used to mirror a reference about a vertical or horizontal axis.

You can access this tool from the following:

Ribbon: Drawing > Attach > Reference > More split button
Toolbox: Reference

Also used to mirror references using a fence and to mirror references selected from the References dialog list.

When working with a read-only file such as an i-model, you can use this tool and you can view its impact on the original drawing but the changes will not be saved.

Setting	Description
Method	Sets the method by which the reference is mirrored. About Horizontal Line — The references is mirrored about a horizontal axis. About Vertical Line — The reference is mirrored about a vertical axis.
Move Boundary with Reference	If on, any clipping boundary and/or clipping mask(s) are mirrored with the reference. If off, only the reference is mirrored, with any clipping boundary and/or clipping mask(s) remaining as is.
Use Reference Dialog List	If on, the reference(s) selected in the References dialog is mirrored. (Not available) All options regarding references are controlled through the Model tab of the Project Explorer dialog.
Use Fence	If on, the fence contents are mirrored. The option menu sets the Fence (Selection) Mode.

Key-in: REFERENCE MIRROR HORIZONTAL [


[filename]

]

Key-in: REFERENCE MIRROR VERTICAL [


[filename]

]